This instruction manual gives handling information and precautions for use
equipment. Incorrect handling might cause an unexpected fault. Before using
equipment, please read this manual carefully to use the equipment to its optimum.
Please forward this manual to the end user.
For further details please refer to Mitsubishi manuals for Frequency Inverters and
installation guidelines, which contain detailed information about installation conforming
to EMC.
Safety instruction
Do not touch the filter while the power is on or when the inverter is running.
Otherwise, you may access the exposed high-voltage terminals and charging
part and get an electric shock.
The inverter and EMC filter will be hot while the power is ON and for a short
after the power is turned OFF. Touching the inverter or filter could cause burns.
Do not switch power on before connecting the inverter power connection
cables to the inverter. Doing so can cause an electric shock or failure.
1. Applicable inverters
Filter type Applicable inverter
FR-S5NFSA-0.75K FR-S520S-0.2K to 0.75K-EC (R), -CH (R)
FR-S5NFSA-1.5K FR-S520S-1.5K-EC (R), -CH (R)
FR-S5NFSB-0.75K FR-S520S-0.2K to 0.75K-EC (R), -CH (R)
FR-S5NFSB-1.5K FR-S520S-1.5K-EC (R), -CH (R)
2. Product diagram
This instruction manual gives handling information and precautions for use
equipment. Incorrect handling might cause an unexpected fault. Before using
equipment, please read this manual carefully to use the equipment to its optimum.
Please forward this manual to the end user.
For further details please refer to Mitsubishi manuals for Frequency Inverters and
installation guidelines, which contain detailed information about installation conforming
to EMC.
Safety instruction
Do not touch the filter while the power is on or when the inverter is running.
Otherwise, you may access the exposed high-voltage terminals and charging
part and get an electric shock.
The inverter and EMC filter will be hot while the power is ON and for a short
after the power is turned OFF. Touching the inverter or filter could cause burns.
Do not switch power on before connecting the inverter power connection
cables to the inverter. Doing so can cause an electric shock or failure.
1. Applicable inverters
Filter type Applicable inverter
FR-S5NFSA-0.75K FR-S520S-0.2K to 0.75K-EC (R), -CH (R)
FR-S5NFSA-1.5K FR-S520S-1.5K-EC (R), -CH (R)
FR-S5NFSB-0.75K FR-S520S-0.2K to 0.75K-EC (R), -CH (R)
FR-S5NFSB-1.5K FR-S520S-1.5K-EC (R), -CH (R)
2. Product diagram
3. Installation
? Method for installation on the rear panel of
the inverter (Vibration: 5.9 m/s2)
? Method for installation in parallel with the
inverter (Vibration: 2.4 m/s2)
Mounting screws (M4 3)
10mm or more
4. Wiring
Earth the filter before connecting the power to prevent an electrical shock.
Shielded cable
5. Specifications
6. Outline drawings